Our recommended TG4 console setup
Tipsy recommends connecting TG4 directly to your controller with a 3.5mm cable.
Both mic and no-mic cables are suitable. Our TC50M and TC20 inline microphones are compatible with supported controller headset jacks, including PS5 DualSense, and can be used for voice chat. A no-mic cable, such as the 2m Melody 3, can be paired with a console-compatible standalone microphone when you want voice chat.
For better voice quality and flexible placement, we recommend a standalone microphone; many other brands offer great options at affordable prices. It is optional. If you do not need a microphone, simply mute or disable microphone input in your device settings.
Why we recommend it
In our PS5 listening tests, connecting the same IEMs to the console through our USB DSP cable sounded roughly 20% quieter than connecting them to the controller with a 3.5mm cable. This is an approximate listening impression from our test setup, not a fixed output specification; the difference varies with the IEMs, gain and volume settings. We noticed it with TG4 and especially M5. Impedance alone does not determine how loud an IEM will sound.
In our tests, TG4 connected to the PS5 controller with a 3.5mm cable, paired with a compatible standalone microphone for voice chat, gave our preferred overall result. If you prefer USB for custom EQ, you can adjust the DSP cable’s gain in the web tool on a PC, save it to the cable, then reconnect it to PS5. Start at a low listening volume and increase gain gradually; reduce it if the sound distorts.
Want to save your own EQ?
Use the original TG4 USB-C DSP cable for custom EQ. The profile is stored in the cable’s DSP, not in the earpieces, so it stays with that cable.
- Connect the DSP cable to a PC and open our web tuning tool through the guide below.
- Adjust your EQ and, if needed, gain. Use the tool’s save function to store the settings on the DSP cable.
- Connect that same cable to a compatible console. Your saved profile remains available without leaving the PC connected.
New TG4 units support compatible consoles out of the box; older units may need a firmware update. The USB cable’s microphone can be used on a compatible PS5 setup; its inline control buttons do not work on PS5. If you want to use the cable’s microphone, select the USB device as your microphone input in PS5 Sound settings.
TC50M and TC20 are analog cables: they cannot store DSP EQ. Switching back to a 3.5mm cable also leaves the DSP cable’s saved EQ behind.
M3 and TG4: factory DSP gain
The TC50 DSP cable’s factory gain is set for M3 and TG4. Start with those settings and adjust only to suit your listening level and EQ.
M5: our preferred cable and DAC/amp pairing
For M5, we recommend its original analog cable and bundled Turbo 3 DAC/amp with a compatible USB source, rather than the TC50 DSP cable as the first choice. Turbo 3 has a dedicated headphone amplifier stage, separate from its DAC, that provides more drive. In our listening tests, we prefer this pairing with M5.
If you choose TC50 DSP to use custom EQ with M5, open the web tool on a PC, add 2–3 dB of gain, then save the settings to the DSP cable before reconnecting it. Begin at a low listening volume and reduce gain if you hear distortion. This gain adjustment changes the level; it does not give the DSP cable the same amplifier capability or guarantee the same sound as Turbo 3.
For controller-based console listening, use M5’s analog 3.5mm connection. The Turbo 3 recommendation applies to USB sources that support that DAC/amp; it is not a compatibility claim for every console.
Xbox compatibility
The TG4 and TC50 DSP USB audio connection does not support Xbox. Use a compatible 3.5mm controller connection for listening. For a separate microphone, choose an explicitly Xbox-compatible solution; do not assume a general-purpose USB microphone will work.
